TITLE 68: PROFESSIONS AND OCCUPATIONS CHAPTER VII: DEPARTMENT OF FINANCIAL AND PROFESSIONAL REGULATION SUBCHAPTER b: PROFESSIONS AND OCCUPATIONS PART 1380 THE PROFESSIONAL ENGINEERING PRACTICE ACT OF 1989 The General Assembly's Illinois Administrative Code database includes only those rulemakings that have been permanently adopted. This menu will point out the Sections on which an emergency rule (valid for a maximum of 150 days, usually until replaced by a permanent rulemaking) exists. The emergency rulemaking is linked through the notation that follows the Section heading in the menu. View Entire Part Section 1380.210 Approved Engineering Program Section 1380.220 Definition of a Non-approved Program Section 1380.230 Approved Experience Section 1380.240 Application for Fundamentals of Engineering Examination (Repealed) Section 1380.242 Application for Enrollment as an Engineer Intern by Acceptance of Examination Section 1380.245 Application for the Principles and Practice of Engineering Exam (Part II) (Repealed) Section 1380.250 Application for Licensure as a Professional Engineer by Acceptance of Examination Section 1380.260 Examination Section 1380.270 Restoration Section 1380.275 Fees Section 1380.280 Endorsement Section 1380.285 Inactive Status Section 1380.290 Professional Design Firm Section 1380.295 Seal and Signature Requirements Section 1380.296 Acts Constituting the Practice of Professional Engineering Pursuant to Section 4 of the Act Section 1380.300 Standards of Professional Conduct Section 1380.305 Professional Engineer Complaint Committee Section 1380.310 Renewals Section 1380.320 Granting Variances Section 1380.325 Professional Development Section 1380.APPENDIX A Significant Dates for the Administration of the Act Section 1380.ILLUSTRATION A Seal and Signature Requirements

AUTHORITY: Implementing the Professional Engineering Practice Act of 1989 [225 ILCS 325] and authorized by Section 2105-15(7) of the Civil Administrative Code of Illinois [20 ILCS 2105/2105-15(7)].

SOURCE: Rules and Regulations Promulgated for the Administration of the Illinois Professional Engineering Act, effective March 10, 1976; codified at 5 Ill. Reg. 11055; codified and amended at 5 Ill. Reg. 14171, effective December 3, 1981; emergency amendment at 6 Ill. Reg. 916, effective January 6, 1982, for a maximum of 150 days; amended at 6 Ill. Reg. 7448, effective June 15, 1982; Part repealed at 9 Ill. Reg. 10038, effective June 18, 1985; new Part adopted at 9 Ill. Reg. 10040, effective June 18, 1985; amended at 10 Ill. Reg. 19507, effective November 5, 1986; amended at 11 Ill. Reg. 8767, effective April 20, 1987; recodified from Chapter I, 68 Ill. Adm. Code 380 (Department of Registration and Education) to Chapter VII, 68 Ill. Adm. Code 1380 (Department of Professional Regulation) pursuant to P.A. 85-225, effective January 1, 1988, at 12 Ill. Reg. 2942; amended at 14 Ill. Reg. 247, effective December 28, 1990; amended at 15 Ill. Reg. 17729, effective November 26, 1991; amended at 16 Ill. Reg. 15553, effective September 28, 1992; amended at 18 Ill. Reg. 14737, effective September 19, 1994; amended at 19 Ill. Reg. 16076, effective November 17, 1995; amended at 20 Ill. Reg. 6477, effective April 25, 1996; amended at 21 Ill. Reg. 13839, effective October 1, 1997; amended at 22 Ill. Reg. 16516, effective September 3, 1998; amended at 24 Ill. Reg. 625, effective December 31, 1999; amended at 24 Ill. Reg. 13727, effective August 28, 2000; amended at 26 Ill. Reg. 4688, effective March 11, 2002; amended at 27 Ill. Reg. 13301, effective July 16, 2003; amended at 34 Ill. Reg. 5623, effective March 30, 2010; amended at 36 Ill. Reg. 272, effective January 6, 2012; amended at 39 Ill. Reg. 14859, effective November 13, 2015; amended at 47 Ill. Reg. 876, effective January 5, 2023.