Illinois General Assembly

  Bills & Resolutions  
  Compiled Statutes  
  Public Acts  
  Legislative Reports  
  IL Constitution  
  Legislative Guide  
  Legislative Glossary  

 Search By Number
 (example: HB0001)
Search Tips

Search By Keyword

Illinois Compiled Statutes

Information maintained by the Legislative Reference Bureau
Updating the database of the Illinois Compiled Statutes (ILCS) is an ongoing process. Recent laws may not yet be included in the ILCS database, but they are found on this site as Public Acts soon after they become law. For information concerning the relationship between statutes and Public Acts, refer to the Guide.

Because the statute database is maintained primarily for legislative drafting purposes, statutory changes are sometimes included in the statute database before they take effect. If the source note at the end of a Section of the statutes includes a Public Act that has not yet taken effect, the version of the law that is currently in effect may have already been removed from the database and you should refer to that Public Act to see the changes made to the current law.


()

415 ILCS 151/Art. 1

 
    (415 ILCS 151/Art. 1 heading)
ARTICLE 1. CONSUMER ELECTRONICS RECYCLING ACT
(This Article is scheduled to be repealed on December 31, 2026)
(Source: P.A. 100-433, eff. 8-25-17.)

415 ILCS 151/1-1

    (415 ILCS 151/1-1)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-1. Short title. This Act may be cited as the Consumer Electronics Recycling Act. References in this Article to "this Act" mean this Article.
(Source: P.A. 100-433, eff. 8-25-17.)

415 ILCS 151/1-3

    (415 ILCS 151/1-3)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-3. Findings; purpose.
    (a) The General Assembly finds all of the following:
        (1) Many older and obsolete consumer electronic
    
products contain materials which may pose environmental and health risks that should be managed.
        (2) Consumer electronic products contain metals,
    
plastics, glass, and other potentially valuable materials. The reuse and recycling of these materials can conserve natural resources and energy.
        (3) The recycling and reuse of the covered electronic
    
devices defined under this Act falls within the State of Illinois' interest in the proper management of such products.
        (4) Illinois counties and municipalities may face
    
significant cost burdens in collecting and processing obsolete electronic products for reuse and recycling.
        (5) Manufacturers of electronic products should share
    
responsibility for the proper management of obsolete consumer electronic products.
        (6) Illinois counties and municipalities, and the
    
citizens of Illinois, will benefit from the implementation of a program or programs for the proper management of obsolete consumer electronic products operated by manufacturers that are actively overseen by the State.
        (7) It is the intent of the State to allow
    
manufacturers to coordinate their activities and programs related to the proper management of obsolete covered electronic devices as defined under this Act under strict State supervision regardless of the effect the manufacturers' actions or such coordination will have on competition.
        (8) It is in the best interest of the State to
    
promote the coordination of manufacturer activities and programs related to the proper management of obsolete covered electronic devices through participation in a manufacturer clearinghouse as set forth in the Act.
    (b) The purpose of this Act is to further the interest of the State of Illinois in the proper management of obsolete consumer electronic products by setting forth procedures by which the recycling and processing for reuse of covered electronic devices will be accomplished by manufacturers for those counties and municipalities that wish to opt-in to electronic product manufacturer-run recycling and processing programs that are approved and overseen by the State of Illinois.
(Source: P.A. 100-592, eff. 6-22-18.)

415 ILCS 151/1-5

    (415 ILCS 151/1-5)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-5. Definitions. As used in this Act:
    "Agency" means the Illinois Environmental Protection Agency.
    "Best practices" means standards for collecting and preparing items for shipment and recycling. "Best practices" may include standards for packaging for transport, load size, acceptable load contamination levels, non-CED items included in a load, and other standards as determined under Section 1-85 of this Act. "Best practices" shall consider the desired intent to preserve existing collection programs and relationships when possible.
    "Collector" means a person who collects residential CEDs at any program collection site or one-day collection event and prepares them for transport.
    "Computer", often referred to as a "personal computer" or "PC", means a desktop or notebook computer as further defined below and used only in a residence, but does not mean an automated typewriter, electronic printer, mobile telephone, portable hand-held calculator, portable digital assistant (PDA), MP3 player, or other similar device. "Computer" does not include computer peripherals, commonly known as cables, mouse, or keyboard. "Computer" is further defined as either:
        (1) "Desktop computer", which means an electronic,
    
magnetic, optical, electrochemical, or other high-speed data processing device performing logical, arithmetic, or storage functions for general purpose needs that are met through interaction with a number of software programs contained therein, and that is not designed to exclusively perform a specific type of logical, arithmetic, or storage function or other limited or specialized application. Human interface with a desktop computer is achieved through a stand-alone keyboard, stand-alone monitor, or other display unit, and a stand-alone mouse or other pointing device, and is designed for a single user. A desktop computer has a main unit that is intended to be persistently located in a single location, often on a desk or on the floor. A desktop computer is not designed for portability and generally utilizes an external monitor, keyboard, and mouse with an external or internal power supply for a power source. Desktop computer does not include an automated typewriter or typesetter; or
        (2) "Notebook computer", which means an electronic,
    
magnetic, optical, electrochemical, or other high-speed data processing device performing logical, arithmetic, or storage functions for general purpose needs that are met through interaction with a number of software programs contained therein, and that is not designed to exclusively perform a specific type of logical, arithmetic, or storage function or other limited or specialized application. Human interface with a notebook computer is achieved through a keyboard, video display greater than 4 inches in size, and mouse or other pointing device, all of which are contained within the construction of the unit that comprises the notebook computer; supplemental stand-alone interface devices typically can also be attached to the notebook computer. Notebook computers can use external, internal, or batteries for a power source. Notebook computer does not include a portable hand-held calculator, or a portable digital assistant or similar specialized device. A notebook computer has an incorporated video display greater than 4 inches in size and can be carried as one unit by an individual. A notebook computer is sometimes referred to as a laptop computer.
        (3) "Tablet computer", which means an electronic,
    
magnetic, optical, electrochemical, or other high-speed data processing device performing logical, arithmetic, or storage functions for general purpose needs that are met through interaction with a number of software programs contained therein, and that is not designed to exclusively perform a specific type of logical, arithmetic, or storage function or other limited or specialized application. Human interface with a tablet computer is achieved through a touch screen and video display screen greater than 6 inches in size (all of which are contained within the unit that comprises the tablet computer). Tablet computers may use an external or internal power source. "Tablet computer" does not include a portable hand-held calculator, a portable digital assistant, or a similar specialized device.
    "Computer monitor" means an electronic device that is a cathode-ray tube or flat panel display primarily intended to display information from a computer and is used only in a residence.
    "County recycling coordinator" means the individual who is designated as the recycling coordinator for a county in a waste management plan developed pursuant to the Solid Waste Planning and Recycling Act.
    "Covered electronic device" or "CED" means any computer, computer monitor, television, printer, electronic keyboard, facsimile machine, videocassette recorder, portable digital music player that has memory capability and is battery powered, digital video disc player, video game console, electronic mouse, scanner, digital converter box, cable receiver, satellite receiver, digital video disc recorder, or small-scale server sold at retail. "Covered electronic device" does not include any of the following:
        (1) an electronic device that is a part of a motor
    
vehicle or any component part of a motor vehicle assembled by or for a vehicle manufacturer or franchised dealer, including replacement parts for use in a motor vehicle;
        (2) an electronic device that is functionally or
    
physically part of a larger piece of equipment or that is taken out of service from an industrial, commercial (including retail), library checkout, traffic control, kiosk, security (other than household security), governmental, agricultural, or medical setting, including but not limited to diagnostic, monitoring, or control equipment; or
        (3) an electronic device that is contained within a
    
clothes washer, clothes dryer, refrigerator, refrigerator and freezer, microwave oven, conventional oven or range, dishwasher, room air conditioner, dehumidifier, water pump, sump pump, or air purifier. To the extent allowed under federal and State laws and regulations, a CED that is being collected, recycled, or processed for reuse is not considered to be hazardous waste, household waste, solid waste, or special waste.
    "Covered electronic device category" or "CED category" means each of the following 8 categories of residential CEDs:
        (1) computers and small-scale servers;
        (2) computer monitors;
        (3) televisions;
        (4) printers, facsimile machines, and scanners;
        (5) digital video disc players, digital video disc
    
recorders, and videocassette recorders;
        (6) video game consoles;
        (7) digital converter boxes, cable receivers, and
    
satellite receivers; and
        (8) electronic keyboards, electronic mice, and
    
portable digital music players that have memory capability and are battery powered.
    "Manufacturer" means a person, or a successor in interest to a person, under whose brand or label a CED is or was sold at retail. For any CED sold at retail under a brand or label that is licensed from a person who is a mere brand owner and who does not sell or produce a CED, the person who produced the CED or his or her successor in interest is the manufacturer. For any CED sold at retail under the brand or label of both the retail seller and the person that produced the CED, the person that produced the CED, or his or her successor in interest, is the manufacturer.
    "Manufacturer clearinghouse" means an entity that prepares and submits a manufacturer e-waste program plan to the Agency, and oversees the manufacturer e-waste program, on behalf of a group of 2 or more manufacturers cooperating with one another to collectively establish and operate an e-waste program for the purpose of complying with this Act and that collectively represent at least 50% of the manufacturers' total obligations under this Act for a program year.
    "Manufacturer e-waste program" means any program established, financed, and operated by a manufacturer, individually or collectively as part of a manufacturer clearinghouse, to transport and subsequently recycle, in accordance with the requirements of this Act, residential CEDs collected at program collection sites and one-day collection events.
    "Municipal joint action agency" means a municipal joint action agency created under Section 3.2 of the Intergovernmental Cooperation Act.
    "One-day collection event" means a one-day event used as a substitute for a program collection site pursuant to Section 1-15 of this Act.
    "Person" means an individual, partnership, co-partnership, firm, company, limited liability company, corporation, association, joint stock company, trust, estate, political subdivision, State agency, or any other legal entity; or a legal representative, agent, or assign of that entity. "Person" includes a unit of local government.
    "Printer" means desktop printers, multifunction printer copiers, and printer/fax combinations taken out of service from a residence that are designed to reside on a work surface, and include various print technologies, including without limitation laser and LED (electrographic), ink jet, dot matrix, thermal, and digital sublimation, and "multi-function" or "all-in-one" devices that perform different tasks, including without limitation copying, scanning, faxing, and printing. Printers do not include floor-standing printers, printers with optional floor stand, point of sale (POS) receipt printers, household printers such as a calculator with printing capabilities or label makers, or non-stand-alone printers that are embedded into products that are not CEDs.
    "Program collection site" means a physical location that is included in a manufacturer e-waste program and at which residential CEDs are collected and prepared for transport by a collector during a program year in accordance with the requirements of this Act. Except as otherwise provided in this Act, "program collection site" does not include a retail collection site.
    "Program year" means a calendar year. The first program year is 2019.
    "Recycler" means any person who transports or subsequently recycles residential CEDs that have been collected and prepared for transport by a collector at any program collection site or one-day collection event.
    "Recycling" has the meaning provided under Section 3.380 of the Environmental Protection Act. "Recycling" includes any process by which residential CEDs that would otherwise be disposed of or discarded are collected, separated, or processed and returned to the economic mainstream in the form of raw materials or products.
    "Residence" means a dwelling place or home in which one or more individuals live.
    "Residential covered electronic device" or "residential CED" means any covered electronic device taken out of service from a residence in the State.
    "Retail collection site" means a private sector collection site operated by a retailer collecting on behalf of a manufacturer.
    "Retailer" means a person who first sells, through a sales outlet, catalogue, or the Internet, a covered electronic device at retail to an individual for residential use or any permanent establishment primarily where merchandise is displayed, held, stored, or offered for sale to the public.
    "Sale" means any retail transfer of title for consideration of title including, but not limited to, transactions conducted through sales outlets, catalogs, or the Internet or any other similar electronic means. "Sale" does not include financing or leasing.
    "Small-scale server" means a computer that typically uses desktop components in a desktop form designed primarily to serve as a storage host for other computers. To be considered a small-scale server, a computer must: be designed in a pedestal, tower, or other form that is similar to that of a desktop computer so that all data processing, storage, and network interfacing is contained within one box or product; be designed to be operational 24 hours per day and 7 days per week; have very little unscheduled downtime, such as on the order of hours per year; be capable of operating in a simultaneous multi-user environment serving several users through networked client units; and be designed for an industry-accepted operating system for home or low-end server applications.
    "Television" means an electronic device that contains a cathode-ray tube or flat panel screen the size of which is greater than 4 inches when measured diagonally and is intended to receive video programming via broadcast, cable, satellite, Internet, or other mode of video transmission or to receive video from surveillance or other similar cameras.
(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17; 100-592, eff. 6-22-18.)

415 ILCS 151/1-10

    (415 ILCS 151/1-10)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-10. Manufacturer e-waste program.
    (a) For program year 2019 and each program year thereafter, each manufacturer shall, individually or collectively as part of a manufacturer clearinghouse, provide a manufacturer e-waste program to transport and subsequently recycle, in accordance with the requirements of this Act, residential CEDs collected at, and prepared for transport from, the program collection sites and one-day collection events included in the program during the program year.
    (b) Each manufacturer e-waste program must include, at a minimum, the following:
        (1) satisfaction of the convenience standard
    
described in Section 1-15 of this Act;
        (2) instructions for designated county recycling
    
coordinators and municipal joint action agencies to annually file notice to participate in the program;
        (3) transportation and subsequent recycling of the
    
residential CEDs collected at, and prepared for transport from, the program collection sites and one-day collection events included in the program during the program year; and
        (4) submission of a report to the Agency, by March 1,
    
2020, and each March 1 thereafter, which includes:
            (A) the total weight of all residential CEDs
        
transported from program collection sites and one-day collection events throughout the State during the preceding program year by CED category;
            (B) the total weight of residential CEDs
        
transported from all program collection sites and one-day collection events in each county in the State during the preceding program year by CED category; and
            (C) the total weight of residential CEDs
        
transported from all program collection sites and one-day collection events in each county in the State during that preceding program year and that was recycled.
    (c) Each manufacturer e-waste program shall make the instructions required under paragraph (2) of subsection (b) available on its website by December 1, 2017, and the program shall provide to the Agency a hyperlink to the website for posting on the Agency's website.
    (d) Nothing in this Act shall prevent a manufacturer from accepting, through a manufacturer e-waste program, residential CEDs collected through a curbside or drop-off collection program that is operated pursuant to a residential franchise collection agreement authorized by Section 11-19-1 of the Illinois Municipal Code or Section 5-1048 of the Counties Code between a third party and a unit of local government located within a county or municipal joint action agency that has elected to participate in a manufacturer e-waste program.
    (e) A collection program operated in accordance with this Section shall:
        (1) meet the collector responsibilities under
    
subsections (a), (a-5), (d), (e), and (g) under Section 1-45 and require certification on the bill of lading or similar manifest from the unit of local government, the third party, and the county or municipal joint action agency that elected to participate in the manufacturer e-waste program that the CEDs were collected, to the best of their knowledge, from residential consumers in the State of Illinois;
        (2) comply with the audit provisions under subsection
    
(g) of Section 1-30;
        (3) locate any drop-off location where CEDs are
    
collected on property owned by a unit of local government; and
        (4) have signage at any drop-off location indicating
    
only residential CEDs are accepted for recycling.
    Manufacturers of CEDs are not financially responsible for transporting and consolidating CEDs collected from a collection program's drop-off location. Any drop-off location used in 2019 must have been identified by the county or municipal joint action agency in the written notice of election to participate in the manufacturer e-waste program in accordance with Section 1-20 by March 1, 2018. Any drop-off location operating in 2020 or in subsequent years must be identified by the county or municipal joint action agency in the annual written notice of election to participate in a manufacturer e-waste program in accordance with Section 1-20 to be eligible for the subsequent program year.
(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17; 100-592, eff. 6-22-18; 100-1165, eff. 6-1-19; 101-81, eff. 7-12-19.)
 

415 ILCS 151/1-15

    (415 ILCS 151/1-15)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-15. Convenience standard for program collection sites and one-day collection events.
    (a) Beginning in 2019 each manufacturer e-waste program for a program year must include, at a minimum, program collection sites in the following quantities in counties that elect to participate in the manufacturer e-waste program for the program year:
        (1) one program collection site in each county that
    
has elected to participate in the manufacturer e-waste program for the program year and that has a population density that is less than 250 individuals per square mile;
        (2) two program collection sites in each county that
    
has elected to participate in the manufacturer e-waste program for the program year and that has a population density that is greater than or equal to 250 individuals per square mile but less than 500 individuals per square mile;
        (3) three program collection sites in each county
    
that has elected to participate in the manufacturer e-waste program for the program year and that has a population density that is greater than or equal to 500 individuals per square mile but less than 750 individuals per square mile;
        (4) four program collection sites in each county that
    
has elected to participate in the manufacturer e-waste program for the program year and that has a population density that is greater than or equal to 750 individuals per square mile but less than 1,000 individuals per square mile;
        (5) five program collection sites in each county that
    
has elected to participate in the manufacturer e-waste program for the program year and that has a population density that is greater than or equal to 1,000 individuals per square mile but less than 5,000 individuals per square mile; and
        (6) fifteen program collection sites in each county
    
that has elected to participate in the manufacturer e-waste program for the program year and that has a population density that is greater than or equal to 5,000 individuals per square mile.
    For purposes of this Section, county population densities shall be based on the entire county's population density, regardless of whether a municipality or municipal joint action agency in the county participates in a manufacturer e-waste program.
    If a municipality with a population of over 1,000,000 residents elects to participate in a manufacturer e-waste program for a program year, then the program shall provide 10 additional program collection sites for the program year to be located in that municipality, and the program collection sites required under paragraph (6) of subsection (a) of this Section shall be located outside of the municipality.
    If a municipal joint action agency elects to participate in a manufacturer e-waste program for a program year, it shall receive, for that year, a population-based pro rata share of the program collection sites that would be granted to the county in which the municipal joint action agency is located if the county were to elect to participate in the program for that year, rounded to the nearest whole number.
    A designated county recycling coordinator may elect to operate more than the required minimum number of collection sites.
    (b) Notwithstanding subsection (a) of this Section, any county, municipality, or municipal joint action agency that elects to participate in a manufacturer e-waste program may enter into a written agreement with the operators of any manufacturer e-waste program in order to do one or more of the following:
        (1) to decrease the number of program collection
    
sites in the county, municipality, or territorial boundary of the municipal joint action agency for the program year;
        (2) to substitute a program collection site in the
    
county, municipality, or territorial boundary of the municipal joint action agency with either (i) 4 one-day collection events or (ii) a different number of such events as may be provided in the written agreement;
        (3) to substitute the location of a program
    
collection site in the county, municipality, or territorial boundary of the municipal joint action agency for the program year with another location;
        (4) to substitute the location of a one-day
    
collection in the county, municipality, or territorial boundary of the municipal joint action agency with another location; or
        (5) to use, with the agreement of the applicable
    
retailer, a retail collection site as a program collection site.
    An agreement made pursuant to paragraph (1) or (2) of this subsection (b) shall be reduced to writing and included in the manufacturer e-waste program plan as required under subsection (a) of Section 1-25 of this Act.
(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17.)

415 ILCS 151/1-20

    (415 ILCS 151/1-20)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-20. Election to participate in manufacturer e-waste programs. Beginning with program year 2019, a county, a municipal joint action agency, or a municipality with a population of more than 1,000,000 residents may elect to participate in a manufacturer e-waste program by filing with the manufacturer e-waste program and the Agency, on or before March 1, 2018, and on or before March 1 of each year thereafter for the upcoming program year, a written notice of election to participate in the program. The written notice shall include a list of proposed collection locations likely to be available and appropriate to support the program, and may include locations already providing similar collection services. The written notice may include a list of registered recyclers that the county, municipal joint action agency, or municipality would prefer using for its collection sites or one-day events.
    Counties, municipal joint action agencies, and municipalities with a population of more than 1,000,000 residents may contract with registered collectors to operate collection sites. Eligible registered collectors are not limited to private companies and non-government organizations.
(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17.)

415 ILCS 151/1-25

    (415 ILCS 151/1-25)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-25. Manufacturer e-waste program plans.
    (a) By September 1, 2018 for program year 2019, and by July 1 of each year thereafter, each manufacturer shall, individually or through a manufacturer clearinghouse, submit to the Agency a manufacturer e-waste program plan, which includes, at a minimum, the following:
        (1) the contact information for the individual who
    
will serve as the point of contact for the manufacturer e-waste program;
        (2) the identity of each county that has elected to
    
participate in the manufacturer e-waste program during the program year;
        (3) for each county, the location of each program
    
collection site and one-day collection event included in the manufacturer e-waste program for the program year;
        (4) the collector operating each program collection
    
site and one-day collection event included in the manufacturer e-waste program for the program year;
        (5) the recyclers that manufacturers plan to use
    
during the program year to transport and subsequently recycle residential CEDs under the program, with the updated list of recyclers to be provided to the Agency no later than December 1 preceding each program year;
        (6) an explanation of any deviation by the program
    
from the standard program collection site distribution set forth in subsection (a) of Section 1-15 of this Act for the program year, along with copies of all written agreements made pursuant to paragraphs (1) or (2) of subsection (b) of Section 1-15 for the program year; and
        (7) if a group of 2 or more manufacturers are
    
participating in a manufacturer clearinghouse, certification that the methodology used for allocating responsibility for the transportation and recycling of residential CEDs by manufacturers participating in the manufacturer clearinghouse for the program year will be in compliance with the allocation methodology established under Section 1-84.5 of this Act.
    (b) Within 60 days after receiving a manufacturer e-waste program plan, the Agency shall review the plan and approve the plan or disapprove the plan.
        (1) If the Agency determines that the program
    
collection sites and one-day collection events specified in the plan will satisfy the convenience standard set forth in Section 1-15 of this Act, then the Agency shall approve the manufacturer e-waste program plan and provide written notification of the approval to the individual who serves as the point of contact for the manufacturer. The Agency shall make the approved plan available on the Agency's website.
        (2) If the Agency determines the plan will not
    
satisfy the convenience standard set forth in Section 1-15 of this Act, then the Agency shall disapprove the manufacturer e-waste program plan and provide written notification of the disapproval and the reasons for the disapproval to the individual who serves as the point of contact for the manufacturer. Within 30 days after the date of disapproval, the manufacturer shall submit a revised manufacturer e-waste program plan that addresses the deficiencies noted in the Agency's disapproval.
    (c) Manufacturers shall assume financial responsibility for carrying out their e-waste program plans, including, but not limited to, financial responsibility for providing the packaging materials necessary to prepare shipments of collected residential CEDs in compliance with subsection (e) of Section 1-45, as well as financial responsibility for bulk transportation and recycling of collected residential CEDs.
(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17; 100-592, eff. 6-22-18; 100-1165, eff. 6-1-19; 101-81, eff. 7-12-19.)

415 ILCS 151/1-30

    (415 ILCS 151/1-30)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-30. Manufacturer registration.
    (a) By April 1, 2018, and by April 1 of each year thereafter for the upcoming program year, beginning with program year 2019, each manufacturer who sells CEDs in the State must register with the Agency by: (i) submitting to the Agency a $5,000 registration fee; and (ii) completing and submitting to the Agency the registration form prescribed by the Agency. Information on the registration form shall include, without limitation, all of the following:
        (1) a list of all of the brands and labels under
    
which the manufacturer's CEDs are sold or offered for sale in the State; and
        (2) the total weights, by CED category, of CEDs sold
    
in the United States to individuals, under any of the manufacturer's brands or labels, during the calendar year that is 2 years before the applicable program year.
    If, during a program year, any of the manufacturer's CEDs are sold or offered for sale in the State under a brand that is not listed in the manufacturer's registration, then, within 30 days after the first sale or offer for sale under that brand, the manufacturer must amend its registration to add the brand. All registration fees collected by the Agency pursuant to this Section shall be deposited into the Solid Waste Management Fund.
    (b) The Agency shall post on its website a list of all registered manufacturers.
    (c) Beginning in program year 2019, a manufacturer whose CEDs are sold or offered for sale in this State for the first time on or after April 1 of a program year must register with the Agency within 30 days after the date the CEDs are first sold or offered for sale in the State.
    (d) Beginning in program year 2019, manufacturers shall ensure that only recyclers that have registered with the Agency and meet the recycler standards set forth in Section 1-40 are used to transport or recycle residential CEDs collected at any program collection site or one-day collection event.
    (e) Beginning in program year 2019, no manufacturer may sell or offer for sale a CED in this State unless the manufacturer is registered and operates a manufacturer program either individually or as part of the manufacturer clearinghouse as required in this Act.
    (f) Beginning in program year 2019, no manufacturer may sell or offer for sale a CED in this State unless the manufacturer's brand name is permanently affixed to, and is readily visible on, the CED.
    (g) In accordance with a contract or agreement with a county, municipality, or municipal joint action agency that has elected to participate in a manufacturer e-waste program under this Act, manufacturers may, either individually or through the manufacturer clearinghouse, audit program collection sites and proposed program collection sites for compliance with the terms and conditions of the contract or agreement. Audits shall be conducted during normal business hours, and a manufacturer or its designee shall provide reasonable notice to the collection site in advance of the audit. Audits of all program collection sites may include, among other things, physical site location visits and inspections and review of processes, procedures, technical systems, reports, and documentation reasonably related to the collecting, sorting, packaging, and recycling of residential CEDs in compliance with this Act.
    (h) Nothing in this Act shall require a manufacturer or manufacturer e-waste program to collect, transport, or recycle any CEDs other than residential CEDs, or to accept for transport or recycling any pallet or bulk container of residential CEDs that has not been prepared by the collector for shipment in accordance with subsection (e) of Section 1-45.
(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17; 100-592, eff. 6-22-18.)

415 ILCS 151/1-33

    (415 ILCS 151/1-33)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-33. Manufacturer clearinghouse.
    (a) A manufacturer e-waste program plan submitted by a manufacturer clearinghouse may take into account and incorporate individual plans or operations of one or more manufacturers that are participating in the manufacturer clearinghouse.
    (b) If a manufacturer clearinghouse allocates responsibility to manufacturers for manufacturers' transportation and recycling of residential CEDs during a program year as part of a manufacturer e-waste program plan, then the manufacturer clearinghouse shall identify the allocation methodology in its plan submission to the Agency pursuant to Section 1-25 of this Act for review and approval. Any allocation of responsibility among manufacturers for the collection of covered electronic devices shall be in accordance with the allocation methodology established pursuant to Section 1-84.5 of this Act.
    (c) A manufacturer clearinghouse shall have no authority to enforce manufacturer compliance with the requirements of this Act, including compliance with the allocation methodology set forth in a manufacturer e-waste program plan, but shall, upon prior notice to the manufacturer, refer any potential non-compliance to the Agency. A manufacturer clearinghouse may develop and implement policies and procedures that exclude from participation in the manufacturer clearinghouse any manufacturers found by the Illinois Pollution Control Board or a court of competent jurisdiction to have failed to comply with this Act.
(Source: P.A. 100-592, eff. 6-22-18.)

415 ILCS 151/1-35

    (415 ILCS 151/1-35)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-35. Retailer responsibilities.
    (a) Beginning in program year 2019, no retailer who first sells, through a sales outlet, catalogue, or the Internet, a CED at retail to an individual for residential use may sell or offer for sale any CED in or for delivery into this State unless:
        (1) the CED is labeled with a brand, and the label is
    
permanently affixed and readily visible; and
        (2) the manufacturer is registered with the Agency at
    
the time the retailer purchases the CED.
    (b) A retailer shall be considered to have complied with paragraphs (1) and (2) of subsection (a) if:
        (1) a manufacturer registers with the Agency within
    
30 days of a retailer taking possession of the manufacturer's CED;
        (2) a manufacturer's registration expires and the
    
retailer ordered the CED prior to the expiration, in which case the retailer may sell the CED, but only if the sale takes place within 180 days of the expiration; or
        (3) a manufacturer is no longer conducting business
    
and has no successor in interest, in which case the retailer may sell any orphan CED ordered prior to the discontinuation of business.
    (c) Retailers shall not be considered collectors under the convenience standard and retail collection sites shall not be considered a collection site for the purposes of the convenience standard pursuant to Sections 1-10, 1-15, and 1-25 unless otherwise agreed to in writing by the (i) retailer, (ii) operators of the manufacturer e-waste program, and (iii) the applicable county, municipal joint action agency, or municipality. If retailers agree to participate in a county program collection site, then the retailer collection site does not have to collect all CEDs or register as a collector.
    (d) Manufacturers may use retail collection sites for satisfying some or all of their obligations pursuant to Sections 1-10, 1-15 and 1-25.
    (e) Nothing in this Act shall prohibit a retailer from collecting a fee for each CED collected.
(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17.)

415 ILCS 151/1-40

    (415 ILCS 151/1-40)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-40. Recycler responsibilities.
    (a) By January 1, 2019, and by January 1 of each year thereafter for that program year, beginning with program year 2019, each recycler must register with the Agency by (i) submitting to the Agency a $3,000 registration fee and (ii) completing and submitting to the Agency the registration form prescribed by the Agency. The registration form prescribed by the Agency shall include, without limitation, the address of each location where the recycler manages residential CEDs collected through a manufacturer e-waste program and the certification required under subsection (d) of this Section. All registration fees collected by the Agency pursuant to this Section shall be deposited into the Solid Waste Management Fund.
    (a-5) The Agency may deny a registration under this Section if the recycler or any employee or officer of the recycler has a history of:
        (1) repeated violations of federal, State, or local
    
laws, regulations, standards, or ordinances related to the collection, recycling, or other management of CEDs;
        (2) conviction in this State or another state of any
    
crime which is a felony under the laws of this State, or conviction of a felony in a federal court; or conviction in this State or another state or federal court of any of the following crimes: forgery, official misconduct, bribery, perjury, or knowingly submitting false information under any environmental law, regulation, or permit term or condition; or
        (3) gross carelessness or incompetence in handling,
    
storing, processing, transporting, disposing, or otherwise managing CEDs.
    (b) The Agency shall post on the Agency's website a list of all registered recyclers.
    (c) Beginning in program year 2019, no person may act as a recycler of residential CEDs for a manufacturer's e-waste program unless the recycler is registered with the Agency as required under this Section.
    (d) Beginning in program year 2019, recyclers must, as a part of their annual registration, certify compliance with all of the following requirements:
        (1) Recyclers must comply with federal, State, and
    
local laws and regulations, including federal and State minimum wage laws, specifically relevant to the handling, processing, and recycling of residential CEDs and must have proper authorization by all appropriate governing authorities to perform the handling, processing, and recycling.
        (2) Recyclers must implement the appropriate measures
    
to safeguard occupational and environmental health and safety, through the following:
            (A) environmental health and safety training of
        
personnel, including training with regard to material and equipment handling, worker exposure, controlling releases, and safety and emergency procedures;
            (B) an up-to-date, written plan for the
        
identification and management of hazardous materials; and
            (C) an up-to-date, written plan for reporting and
        
responding to exceptional pollutant releases, including emergencies such as accidents, spills, fires, and explosions.
        (3) Recyclers must maintain (i) commercial general
    
liability insurance or the equivalent corporate guarantee for accidents and other emergencies with limits of not less than $1,000,000 per occurrence and $1,000,000 aggregate and (ii) pollution legal liability insurance with limits not less than $1,000,000 per occurrence for companies engaged solely in the dismantling activities and $5,000,000 per occurrence for companies engaged in recycling.
        (4) Recyclers must maintain on file documentation
    
that demonstrates the completion of an environmental health and safety audit completed and certified by a competent internal and external auditor annually. A competent auditor is an individual who, through professional training or work experience, is appropriately qualified to evaluate the environmental health and safety conditions, practices, and procedures of the facility. Documentation of auditors' qualifications must be available for inspection by Agency officials and third-party auditors.
        (5) Recyclers must maintain on file proof of workers'
    
compensation and employers' liability insurance.
        (6) Recyclers must provide adequate assurance, such
    
as bonds or corporate guarantees, to cover environmental and other costs of the closure of the recycler's facility, including cleanup of stockpiled equipment and materials.
        (7) Recyclers must apply due diligence principles to
    
the selection of facilities to which components and materials, such as plastics, metals, and circuit boards, from residential CEDs are sent for reuse and recycling.
        (8) Recyclers must establish a documented
    
environmental management system that is appropriate in level of detail and documentation to the scale and function of the facility, including documented regular self-audits or inspections of the recycler's environmental compliance at the facility.
        (9) Recyclers must use the appropriate equipment for
    
the proper processing of incoming materials as well as controlling environmental releases to the environment. The dismantling operations and storage of residential CED components that contain hazardous substances must be conducted indoors and over impervious floors. Storage areas must be adequate to hold all processed and unprocessed inventory. When heat is used to soften solder and when residential CED components are shredded, operations must be designed to control indoor and outdoor hazardous air emissions.
        (10) Recyclers must establish a system for
    
identifying and properly managing components, such as circuit boards, batteries, cathode-ray tubes, and mercury phosphor lamps, that are removed from residential CEDs during disassembly. Recyclers must properly manage all hazardous and other components requiring special handling from residential CEDs consistent with federal, State, and local laws and regulations. Recyclers must provide visible tracking, such as hazardous waste manifests or bills of lading, of hazardous components and materials from the facility to the destination facilities and documentation, such as contracts, stating how the destination facility processes the materials received. No recycler may send, either directly or through intermediaries, hazardous wastes to solid non-hazardous waste landfills or to non-hazardous waste incinerators for disposal or energy recovery. For the purpose of these guidelines, smelting of hazardous wastes to recover metals for reuse in conformance with all applicable laws and regulations is not considered disposal or energy recovery.
        (11) Recyclers must use a regularly implemented and
    
documented monitoring and record-keeping program that tracks total inbound residential CED material weights and total subsequent outbound weights to each destination, injury and illness rates, and compliance with applicable permit parameters including monitoring of effluents and emissions. Recyclers must maintain contracts or other documents, such as sales receipts, suitable to demonstrate: (i) the reasonable expectation that there is a downstream market or uses for designated electronics, which may include recycling or reclamation processes such as smelting to recover metals for reuse; and (ii) that any residuals from recycling or reclamation processes, or both, are properly handled and managed to maximize reuse and recycling of materials to the extent practical.
        (12) Recyclers must employ industry-accepted
    
procedures for the destruction or sanitization of data on hard drives and other data storage devices. Acceptable guidelines for the destruction or sanitization of data are contained in the National Institute of Standards and Technology's Guidelines for Media Sanitation or those guidelines certified by the National Association for Information Destruction.
        (13) No recycler may employ prison labor in any
    
operation related to the collection, transportation, and recycling of CEDs. No recycler may employ any third party that uses or subcontracts for the use of prison labor.
    (e) Each recycler shall, during each calendar year, transport from each site that the recycler uses to manage residential CEDs not less than 75% of the total weight of residential CEDs present at the site during the preceding calendar year. Each recycler shall maintain on-site records that demonstrate compliance with this requirement and shall make those records available to the Agency for inspection and copying.
    (f) Nothing in this Act shall prevent a person from acting as a recycler independently of a manufacturer e-waste program.
(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17.)

415 ILCS 151/1-45

    (415 ILCS 151/1-45)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-45. Collector responsibilities.
    (a) By January 1, 2019, and by January 1 of each year thereafter for that program year, beginning with program year 2019, a person acting as a collector under a manufacturer e-waste program shall register with the Agency by completing and submitting to the Agency the registration form prescribed by the Agency. The registration form prescribed by the Agency must include, without limitation, the address of each location at which the collector accepts residential CEDs.
    (a-5) The Agency may deny a registration under this Section if the collector or any employee or officer of the collector has a history of:
        (1) repeated violations of federal, State, or local
    
laws, regulations, standards, or ordinances related to the collection, recycling, or other management of CEDs;
        (2) conviction in this State or another state of any
    
crime which is a felony under the laws of this State, or conviction of a felony in a federal court; or conviction in this State or another state or federal court of any of the following crimes: forgery, official misconduct, bribery, perjury, or knowingly submitting false information under any environmental law, regulation, or permit term or condition; or
        (3) gross carelessness or incompetence in handling,
    
storing, processing, transporting, disposing, or otherwise managing CEDs.
    (b) The Agency shall post on the Agency's website a list of all registered collectors.
    (c) Manufacturers and recyclers acting as collectors shall so indicate on their registration under Section 1-30 or 1-40 of this Act.
    (d) By March 1, 2020 and every March 1 thereafter, each collector that operates a program collection site or one-day collection event shall report, to the Agency and to the manufacturer e-waste program, the total weight, by CED category, of residential CEDs transported from the program collection site or one-day collection event during the previous program year.
    (e) Each collector that operates a program collection site or one-day event shall ensure that the collected residential CEDs are sorted and loaded in compliance with local, State, and federal law. In addition, at a minimum, the collector shall also comply with the following requirements:
        (1) residential CEDs must be accepted at the program
    
collection site or one-day collection event unless otherwise provided in this Act;
        (2) residential CEDs shall be kept separate from
    
other material and shall be:
            (A) packaged in a manner to prevent breakage;
        
and
            (B) loaded onto pallets and secured with
        
plastic wrap or in pallet-sized bulk containers prior to shipping; and
            (C) on average per collection site 18,000 pounds
        
per shipment, and if not then the recycler may charge the collector a prorated charge on the shortfall in weight, not to exceed $600;
        (3) residential CEDs shall be sorted into the
    
following categories:
            (A) computer monitors and televisions
        
containing a cathode-ray tube, other than televisions with wooden exteriors;
            (B) computer monitors and televisions
        
containing a flat panel screen;
            (C) all covered televisions that are
        
residential CEDs;
            (D) computers;
            (E) all other residential CEDs; and
            (F) any electronic device that is not part of the
        
manufacturer program that the collector has arranged to have picked up with residential CEDs and for which a financial arrangement has been made to cover the recycling costs outside of the manufacturer program;
        (4) containers holding the CEDs must be structurally
    
sound for transportation; and
        (5) each shipment of residential CEDs from a program
    
collection site or one-day collection event shall include a collector-prepared bill of lading or similar manifest, which describes the origin of the shipment and the number of pallets or bulk containers of residential CEDs in the shipment.
    (f) Except as provided in subsection (g) of this Section, each collector that operates a program collection site or one-day collection event during a program year shall accept all residential CEDs that are delivered to the program collection site or one-day collection event during the program year.
    (g) No collector that operates a program collection site or one-day collection event shall:
        (1) accept, at the program collection site or one-day
    
collection event, more than 7 residential CEDs from an individual at any one time;
        (2) scrap, salvage, dismantle, or otherwise
    
disassemble any residential CED collected at a program collection site or one-day collection event;
        (3) deliver to a manufacturer e-waste program,
    
through its recycler, any CED other than a residential CED collected at a program collection site or one-day collection event; or
        (4) deliver to a person other than the manufacturer
    
e-waste program or its recycler, a residential CED collected at a program collection site or one-day collection event.
    (h) Beginning in program year 2019, registered collectors participating in county supervised collection programs may collect a fee for each desktop computer monitor or television accepted for recycling to cover costs for collection and preparation for bulk shipment or to cover costs associated with the requirements of subsection (e) of Section 1-45.
    (i) Nothing in this Act shall prevent a person from acting as a collector independently of a manufacturer e-waste program.
(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17.)

415 ILCS 151/1-50

    (415 ILCS 151/1-50)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-50. Penalties.
    (a) Except as otherwise provided in this Act, any person who violates any provision of this Act is liable for a civil penalty of $7,000 per violation, provided that the penalty for failure to register or pay a fee under this Act shall be double the applicable registration fee.
    (b) The penalties provided for in this Section may be recovered in a civil action brought in the name of the people of the State of Illinois by the State's Attorney of the county in which the violation occurred or by the Attorney General. Any penalties collected under this Section in an action in which the Attorney General has prevailed shall be deposited in the Environmental Protection Trust Fund, to be used in accordance with the provisions of the Environmental Protection Trust Fund Act.
    (c) The Attorney General or the State's Attorney of a county in which a violation occurs may institute a civil action for an injunction, prohibitory or mandatory, to restrain violations of this Act or to require such actions as may be necessary to address violations of this Act.
    (d) A fine imposed by administrative citation pursuant to Section 1-55 of this Act shall be $1,000 per violation, plus any hearing costs incurred by the Illinois Pollution Control Board and the Agency. Such fines shall be made payable to the Environmental Protection Trust Fund to be used in accordance with the Environmental Protection Trust Fund Act.
    (e) The penalties and injunctions provided in this Act are in addition to any penalties, injunctions, or other relief provided under any other law. Nothing in this Act bars a cause of action by the State for any other penalty, injunction, or other relief provided by any other law.
    (f) A knowing violation of subsections (a), (b), or (c) of Section 1-83 of this Act by anyone other than a residential consumer is a petty offense punishable by a fine of $500. A knowing violation of subsections (a), (b), or (c) of Section 1-83 by a residential consumer is a petty offense punishable by a fine of $25 for a first violation; however, a subsequent violation by a residential consumer is a petty offense punishable by a fine of $50.
    (g) Any person who knowingly makes a false, fictitious, or fraudulent material statement, orally or in writing, to the Agency, related to or required by this Act or any rule adopted under this Act commits a Class 4 felony, and each such statement or writing shall be considered a separate Class 4 felony. A person who, after being convicted under this subsection (g), violates this subsection (g) a second or subsequent time, commits a Class 3 felony.
(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17.)

415 ILCS 151/1-55

    (415 ILCS 151/1-55)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-55. Administrative citations.
    (a) Any violation of a registration requirement in Sections 1-30, 1-40, or 1-45 of this Act, any violation of the reporting requirement in paragraph (4) of subsection (b) of Section 1-10 of this Act, and any violation of a plan submission requirement in Section 1-25 of this Act shall be enforceable by administrative citation issued by the Agency. Whenever Agency personnel shall, on the basis of direct observation, determine that any person has violated any of those provisions, the Agency may issue and serve, within 60 days after the observed violation, an administrative citation upon that person. Each citation shall be served upon the person named or the person's authorized agent for service of process and shall include the following:
        (1) a statement specifying the provisions of this Act
    
that the person has violated;
        (2) the penalty imposed under subsection (d) of
    
Section 1-50 of this Act for that violation; and
        (3) an affidavit by the personnel observing the
    
violation, attesting to their material actions and observations.
    (b) If the person named in the administrative citation fails to petition the Illinois Pollution Control Board for review within 35 days after the date of service, then the Board shall adopt a final order, which shall include the administrative citation and findings of violation as alleged in the citation and shall impose the penalty specified in subsection (d) of Section 1-50 of this Act.
    (c) If a petition for review is filed with the Board to contest an administrative citation issued under this Section, then the Agency shall appear as a complainant at a hearing before the Board to be conducted pursuant to subsection (d) of this Section at a time not less than 21 days after notice of the hearing has been sent by the Board to the Agency and the person named in the citation. In those hearings, the burden of proof shall be on the Agency. If, based on the record, the Board finds that the alleged violation occurred, then the Board shall adopt a final order, which shall include the administrative citation and findings of violation as alleged in the citation, and shall impose the penalty specified in subsection (d) of Section 1-50 of this Act. However, if the Board finds that the person appealing the citation has shown that the violation resulted from uncontrollable circumstances, then the Board shall adopt a final order that makes no finding of violation and imposes no penalty.
    (d) All hearings under this Section shall be held before a qualified hearing officer, who may be attended by one or more members of the Board, designated by the Chairman. All of these hearings shall be open to the public, and any person may submit written statements to the Board in connection with the subject of these hearings. In addition, the Board may permit any person to offer oral testimony. Any party to a hearing under this Section may be represented by counsel, make oral or written argument, offer testimony, cross-examine witnesses, or take any combination of those actions. All testimony taken before the Board shall be recorded stenographically. The transcript so recorded and any additional matter accepted for the record shall be open to public inspection, and copies of those materials shall be made available to any person upon payment of the actual cost of reproducing the original.
(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17.)

415 ILCS 151/1-60

    (415 ILCS 151/1-60)
    Sec. 1-60. (Repealed).
(Source: P.A. 100-433, eff. 8-25-17. Repealed by P.A. 100-362, eff. 8-25-17.)

415 ILCS 151/1-65

    (415 ILCS 151/1-65)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-65. Relation to other State laws. Nothing in this Act affects the validity or application of any other law of this State, or regulations adopted thereunder.
(Source: P.A. 100-433, eff. 8-25-17.)

415 ILCS 151/1-75

    (415 ILCS 151/1-75)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-75. CRT retrievable storage. In order to further the policy of the State to reduce the environmental and economic impacts of transporting and managing cathode-ray tube (CRT) glass, and to support (i) the beneficial use of CRTs in accordance with beneficial use determinations issued by the Agency under Section 22.54 of the Environmental Protection Act and (ii) the storage of CRTs in retrievable storage cells at locations within the State for future recovery; for the purpose of this Act, a CRT shall be considered to be recycled if:
        (1) all recyclable components are removed from the
    
device; and
        (2) the glass from the device is either:
            (A) beneficially reused in accordance with a
        
beneficial use determination issued under Section 22.54 of the Environmental Protection Act; or
            (B) placed in a storage cell, in a manner that
        
allows it to be retrieved in the future, at a waste disposal site that is permitted to accept the glass.
(Source: P.A. 100-433, eff. 8-25-17.)

415 ILCS 151/1-80

    (415 ILCS 151/1-80)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-80. Collection of CEDs outside of the manufacturer e-waste program.
    (a) Nothing in this Act prohibits a waste hauler from entering into a contractual agreement with a unit of local government to establish a collection program for the recycling or reuse of CEDs, including services such as curbside collection, home pick-up, drop-off locations, or similar methods of collection.
    (b) Nothing in this Act shall prohibit a person from establishing an e-waste program independently of a manufacturer e-waste program.
(Source: P.A. 100-433, eff. 8-25-17.)

415 ILCS 151/1-83

    (415 ILCS 151/1-83)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-83. Landfill ban.
    (a) Beginning January 1, 2019, no person may knowingly cause or allow the mixing of a CED, or any other computer, computer monitor, printer, television, electronic keyboard, facsimile machine, videocassette recorder, portable digital music player, digital video disc player, video game console, electronic mouse, scanner, digital converter box, cable receiver, satellite receiver, digital video disc recorder, or small-scale server with municipal waste that is intended for disposal at a landfill.
    (b) Beginning January 1, 2019, no person may knowingly cause or allow the disposal of a CED or any other computer, computer monitor, printer, television, electronic keyboard, facsimile machine, videocassette recorder, portable digital music player, digital video disc player, video game console, electronic mouse, scanner, digital converter box, cable receiver, satellite receiver, digital video disc recorder, or small-scale server in a sanitary landfill.
    (c) Beginning January 1, 2019, no person may knowingly cause or allow the mixing of a CED, or any other computer, computer monitor, printer, television, electronic keyboard, facsimile machine, videocassette recorder, portable digital music player, digital video disc player, video game console, electronic mouse, scanner, digital converter box, cable receiver, satellite receiver, digital video disc recorder, or small-scale server with waste that is intended for disposal by burning or incineration.
    (d) Beginning January 1, 2019, no person may knowingly cause or allow the burning or incineration of a CED, or any other computer, computer monitor, printer, television, electronic keyboard, facsimile machine, videocassette recorder, portable digital music player, digital video disc player, video game console, electronic mouse, scanner, digital converter box, cable receiver, satellite receiver, digital video disc recorder, or small-scale server.
(Source: P.A. 100-433, eff. 8-25-17.)

415 ILCS 151/1-84

    (415 ILCS 151/1-84)
    Sec. 1-84. (Repealed).
(Source: P.A. 100-362, eff. 8-25-17. Repealed by P.A. 100-592, eff. 6-22-18.)

415 ILCS 151/1-84.5

    (415 ILCS 151/1-84.5)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-84.5. Manufacturer clearinghouse; allocation of financial responsibility for the transportation and recycling of covered electronic devices.
    (a) As used in this Section, unless the context otherwise requires:
    "Adjusted total proportional responsibility" means the percentage calculated for each participating manufacturer for a program year under subsection (f) of this Section.
    "Market share" means the percentage that results from dividing:
        (1) the product of the total weight reported for a
    
CED category by a manufacturer, for the calendar year 2 years before the applicable program year, under paragraph (2) of subsection (a) of Section 1-30 of this Act, multiplied by the population adjustment factor for that year; by
        (2) the product of the total weight reported for that
    
CED category by all manufacturers, for the calendar year 2 years before the applicable program year, under paragraph (2) of subsection (a) of Section 1-30 of this Act, multiplied by the population adjustment factor for that year.
    "Participating manufacturer" means a manufacturer that a manufacturer clearinghouse has listed, pursuant to subsection (c) of this Section, as a participant in the manufacturer clearinghouse for a program year.
    "Population adjustment factor" means the percentage that results when (i) the population of Illinois, as reported in the most recent federal decennial census, is divided by (ii) the population of the United States, as reported in the most recent federal decennial census.
    "Return share" means the percentage, by weight, of each CED category that is returned to the program collection sites and one-day collection events operated by or on behalf of either a manufacturer clearinghouse or one or more of its participating manufacturers during the calendar year 2 years before the applicable program year, as reported to the Agency under Section 1-10 of this Act; except that, for program year 2019 and program year 2020, "return share" means the percentage, by weight, of each CED category that is estimated by the manufacturer clearinghouse to be returned to those sites and events during the applicable program year, as reported to the Agency under subsection (b) of this Section.
    "Unadjusted total proportional responsibility" means the percentage calculated for each participating manufacturer under subsection (e) of this Section.
    (b) By March 1, 2018, each manufacturer clearinghouse shall provide the Agency with a statement of the return share for each CED category for program year 2019, and by March 1, 2019, each manufacturer clearinghouse shall provide the Agency with a statement of the return share for each CED category for program year 2020.
    (c) If a manufacturer clearinghouse submits to the Agency a manufacturer e-waste program plan under Section 1-25 of this Act, then the manufacturer clearinghouse shall include in the plan a list of manufacturers that have agreed to participate in the manufacturer clearinghouse for the upcoming program year.
    (d) By November 1, 2018, and each November 1 thereafter, the Agency shall provide each manufacturer clearinghouse with a statement of the unadjusted total proportional responsibility and adjusted total proportional responsibility of each of its participating manufacturers for the upcoming program year.
    (e) For each program year, the Agency shall calculate the unadjusted total proportional responsibility of each participating manufacturer as follows:
        (1) For each CED category, the Agency shall multiply
    
(i) the participating manufacturer's market share for the CED category by (ii) the return share for the CED category, to arrive at the category-specific proportional responsibility of the participating manufacturer for the CED category.
        (2) The Agency shall then, for each participating
    
manufacturer, sum the category-specific proportional responsibilities of the participating manufacturer calculated under paragraph (1), to arrive at the participating manufacturer's unadjusted total proportional responsibility.
    (f) If the sum of all unadjusted total proportional responsibilities of a manufacturer clearinghouse's participating manufacturers for a program year accounts for less than 100% of the return share for that year, then the Agency shall divide the unallocated return share among participating manufacturers in proportion to their unadjusted total proportional responsibilities, to arrive at the adjusted total proportional responsibility for each participating manufacturer.
    (g) A manufacturer may use retail collection sites to satisfy some or all of the manufacturer's responsibilities, including, but not limited to, the manufacturer's transportation and recycling of collected residential CEDs pursuant to any allocation methodology established under this Act. Nothing in this Act shall prevent a manufacturer from using retail collection sites to satisfy any percentage of the manufacturer's total responsibilities, including, but not limited to, the manufacturer's transportation and recycling of collected residential CEDs pursuant to any allocation methodology established under this Act or by administrative rule.
(Source: P.A. 100-592, eff. 6-22-18.)

415 ILCS 151/1-85

    (415 ILCS 151/1-85)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-85. Advisory Electronics Recycling Task Force.
    (a) There is hereby created an Advisory Electronics Recycling Task Force, which shall consist of the following 10 members, to be appointed by the Director of the Agency:
        (1) two individuals who are representatives of county
    
recycling programs;
        (2) two individuals who are representatives of
    
recycling companies;
        (3) two individuals who are representatives from the
    
manufacturing industry;
        (4) one individual who is a representative of a
    
statewide trade association representing retailers;
        (5) one individual who is a representative of a
    
statewide trade association representing manufacturers;
        (6) one individual who is a one representative of a
    
statewide trade association representing waste disposal companies; and
        (7) one individual who is a representative of a
    
national trade association representing manufacturers.
    Members of the Task Force shall be appointed as soon as practicable after the effective date of this amendatory Act of the 100th General Assembly, shall serve for 2-year terms, and may be reappointed. Vacancies shall be filled by the Director of the Agency for the remainder of the current term. Members shall serve voluntarily and without compensation.
    Members shall elect from their number a chairperson, who shall also serve a 2-year term. The Task Force shall meet initially at the call of the Director of the Agency and thereafter at the call of the chairperson. A simple majority of the members of the Task Force shall constitute a quorum for the transaction of business, and all actions and recommendations of the Task Force must be approved by a simple majority of its members.
    (b) By November 1, 2018, and each November 1 thereafter, the Task Force shall submit, to the Agency for posting on the Agency's website, a list of agreed-to best practices to be used at program collection sites and one-day collection events in the following program year. When establishing best practices, the Task Force shall consider the desired intent to preserve existing collection programs and relationships when possible.
    (c) The Agency shall provide the Task Force with administrative support as necessary.
(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17.)

415 ILCS 151/1-86

    (415 ILCS 151/1-86)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-86. Public Reporting. Each year, the Agency shall post on its website the information it receives pursuant to subdivision (b)(4) of Section 1-10 showing the amounts of residential CEDs being collected and recycled in each county in each program year. The Agency shall notify the General Assembly of the availability of this information.
(Source: P.A. 100-433, eff. 8-25-17.)

415 ILCS 151/1-87

    (415 ILCS 151/1-87)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-87. Antitrust. A manufacturer or manufacturer clearinghouse acting in accordance with the provisions of this Act may negotiate, enter into contracts with, or conduct business with each other and with any other entity developing, implementing, operating, participating in, or performing any other activities directly related to a manufacturer e-waste program approved pursuant to this Act, and the manufacturer, manufacturer clearinghouse, and any entity developing, implementing, operating, participating in, or performing any other activities related to a manufacturer e-waste program approved pursuant to this Act are not subject to damages, liability, or scrutiny under federal antitrust law or the Illinois Antitrust Act, regardless of the effects of their actions on competition. The supervisory activities described in this Act are sufficient to confirm that activities of the manufacturers, manufacturer clearinghouse, and any entity developing, implementing, operating, participating in, or performing any other activities related to a manufacturer e-waste program that is approved pursuant to Section 1-25 are authorized and actively supervised by the State.
(Source: P.A. 100-592, eff. 6-22-18.)

415 ILCS 151/1-90

    (415 ILCS 151/1-90)
    (Section scheduled to be repealed on December 31, 2026)
    Sec. 1-90. Repeal. This Article is repealed on December 31, 2026.
(Source: P.A. 100-433, eff. 8-25-17.)