TITLE 56: LABOR AND EMPLOYMENT
CHAPTER XIII: DEPARTMENT OF LABOR
PART 6000 AMUSEMENT RIDE AND ATTRACTION SAFETY ACT
SECTION 6000.15 INCORPORATED AND REFERENCED MATERIALS


 

Section 6000.15 Incorporated and Referenced Materials

 

a) The following regulations and standards are incorporated in this Part. All incorporations by reference refer to the regulations, guidelines and standards on the date specified and do not include any editions or amendments after the specified date.

 

1) Private and professional association standards:

 

A) A.M. Best Bond and Liability Insurance Ratings, available from A.M. Best Company, Ambest Road, Oldwick NJ 08858.

 

B) The following standards and recommended practices of the American National Standards Institute, Inc. (ANSI), which may be obtained from the American National Standards Institute, Inc., 1899 L Street, NW, 11th Floor, Washington DC 20036:

 

i) Standards

 

ANSI B-77.1 2006 Passenger Ropeways Aerial Tramways, Aerial Lifts, Surface Lifts, Tows and Conveyors Safety Requirements (2006); and

 

ANSI B30.5 2000 Safety Standard for Mobile and Locomotive Cranes (2006).

 

ii) Recommended Practices

 

ANSI SAE J-1241 Ground Vehicle Recommended Practices (1999).

 

C) American Society for Nondestructive Testing, Inc. (ASNT) Recommended Practice No. SNT-TC-1A (2006), which may be obtained from the American Society for Nondestructive Testing, Inc., 1711 Arlingate Lane, Columbus OH 43228.

 

D) The following standards of the ASTM International (ASTM), which may be obtained from the ASTM International, 100 Barr Harbor Drive, West Conshohocken PA 19428:

 

i) ASTM F770-18 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices (2009);

 

ii) ASTM F2374-17 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices (2010);

 

iii) ASTM F2007-12 Standard Practice for Design, Manufacture, and Operation of Concession Go‑Karts and Facilities (2012);

 

iv) ASTM F2291-21 Standard Practice for Design of Amusement Rides and Devices (2021), except 6.4.2.2;

 

v) ASTM F2374-10 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices (2010);

 

vi) ASTM F2374-17 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices (2017);

 

vii) ASTM 2959-19 Standard Practice for Aerial Adventure Courses;

 

viii) ASTM F2970-20 Standard Practice for Design, Manufacturing, Installation, Operation, Maintenance, Inspection and Major Modifications of Trampoline Courts (2020); and

 

ix) ASTM F2974-18 Standard Guide for Auditing Amusement Rides and Devices (2013)

 

E) The following standards of the National Fire Protection Association (NFPA), which may be obtained from the National Fire Protection Association, 1 Batterymarch Park, Quincy MA 02169:

 

i) NFPA 10, Standard for Portable Fire Extinguishers (2007);

 

ii) NFPA 30, Flammable and Combustible Liquids Code (2003);

 

iii) NFPA 70, National Electrical Code Article 525 Carnivals, Circuses, Fairs, and Similar Events (2005); and

 

iv) NFPA 701, Standard Methods of Fire Tests for Flame Propagation of Textiles and Films (1999).

 

F) SAE J-1241-1999 Fuel and Lubricant Tanks for Motorcycles, which may be obtained from the Society of Automotive Engineers (SAE), 400 Commonwealth Drive, Warrendale PA 15096 (1999).

 

G) Snell Helmet Safety Standards, which may be obtained from Snell Memorial Foundation Inc., 3628 Madison Avenue, North Highlands CA 95660 (1998).

 

2) Federal Regulations

 

A) 29 CFR 1910.180 (2006); and

 

B) 29 CFR 1926.550(g) (2006).

 

b) The following State statutes are referenced in this Part:

 

1) Freedom of Information Act [5 ILCS 140];

 

2) Amusement Ride and Attraction Safety Act [430 ILCS 85];

 

3) Illinois Controlled Substances Act [720 ILCS 570]; and

 

4) Weights and Measures Act [225 ILCS 470].

 

(Source: Amended at 46 Ill. Reg. 9899, effective May 26, 2022)