TITLE 35: ENVIRONMENTAL PROTECTION
SUBTITLE G: WASTE DISPOSAL
CHAPTER I: POLLUTION CONTROL BOARD
SUBCHAPTER c: HAZARDOUS WASTE OPERATING REQUIREMENTS
PART 725 INTERIM STATUS STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE, AND DISPOSAL FACILITIES
SECTION 725.483 INTERIM STATUS THERMAL TREATMENT DEVICES BURNING PARTICULAR HAZARDOUS WASTES


 

Section 725.483  Interim Status Thermal Treatment Devices Burning Particular Hazardous Wastes

 

a)         An owner or operator of a thermal treatment device subject to this Subpart P may burn hazardous waste numbers F020, F021, F022, F023, F026, or F027 if it receives a certification from the Agency that it can meet the performance standards of Subpart O of 35 Ill. Adm. Code 724 when it burns these wastes.

 

b)         The following standards and procedures must be used in determining whether to certify a thermal treatment unit:

 

1)         The owner or operator must submit an application to the Agency containing the applicable information in 35 Ill. Adm. Code 703.125, 703.222, 703.223, 703.224, and 703.225 demonstrating that the thermal treatment unit can meet the performance standard in Subpart O of 35 Ill. Adm. Code 724 when it burns these wastes.

 

2)         The Agency must issue a tentative decision as to whether the thermal treatment unit can meet the performance standards in Subpart O of 35 Ill. Adm. Code 724.  Notification of this tentative decision must be provided by newspaper advertisement and radio broadcast in the county where the thermal treatment device is located.  The Agency must accept comment on the tentative decision for 60 days.  The Agency also may hold a public hearing upon request or at its discretion.

 

3)         After the close of the public comment period, the Agency must issue a decision whether or not to certify the thermal treatment unit.

 

(Source:  Amended at 29 Ill. Reg. 6389, effective April 22, 2005)