TITLE 35: ENVIRONMENTAL PROTECTION
SUBTITLE G: WASTE DISPOSAL
CHAPTER I: POLLUTION CONTROL BOARD
SUBCHAPTER c: HAZARDOUS WASTE OPERATING REQUIREMENTS
PART 722 STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE
SECTION 722.118 USEPA IDENTIFICATION NUMBERS AND RE-NOTIFICATION FOR A SMALL QUANTITY GENERATOR OR LARGE QUANTITY GENERATOR
Section 722.118 USEPA Identification Numbers and Re-Notification for a Small Quantity Generator or Large Quantity Generator
a) An SQG or LQG must not treat, store, dispose of, transport, or offer for transportation hazardous waste without having received a USEPA identification number.
b) An SQG or LQG that has not received a USEPA identification number must obtain one by applying to the Agency using Notification of RCRA Subtitle C Activities (Site Identification Form) (USEPA Form 8700-12). Upon receiving the request USEPA will assign a USEPA identification number to the generator.
c) An SQG or LQG must not offer its hazardous waste to a transporter or treatment, storage, or disposal facility that has not received a USEPA identification number.
1) An SQG must renotify the Agency starting in 2021 and every four years thereafter using USEPA Form 8700-12. The SQG must submit this re-notification by September 1st of each year in which re-notification is required.
2) An LQG must renotify the Agency by March 1 of each even-numbered year thereafter using USEPA Form 8700-12. An LQG may submit this renotification as part of its annual report required by Section 722.141.
e) A recognized trader must not arrange for import or export of hazardous waste without having received a USEPA identification number from USEPA.
BOARD NOTE: USEPA Form 8700-12 is available from the Agency, Bureau of Land (217-782-6762). It is also available on-line for download in PDF file format: www.epa.gov/hwgenerators/instructions-and-form-hazardous-waste-generators-transporters-and-treatment-storage-and.
(Source: Amended at 43 Ill. Reg. 5955, effective May 2, 2019)