(605 ILCS 5/4-220)
    Sec. 4-220. Bicycle and pedestrian ways.
    (a) Bicycle and pedestrian ways shall be given full consideration in the planning and development of transportation facilities, including the incorporation of such ways into State plans and programs.
    (b) In or within one mile of an urban area, bicycle and pedestrian ways shall be established in conjunction with the construction, reconstruction, or other change of any State transportation facility except:
        (1) in pavement resurfacing projects that do not
    
widen the existing traveled way or do not provide stabilized shoulders; or
        (2) where approved by the Secretary of Transportation
    
based upon documented safety issues, excessive cost or absence of need.
    (c) Bicycle and pedestrian ways may be included in pavement resurfacing projects when local support is evident or bicycling and walking accommodations can be added within the overall scope of the original roadwork.
    (d) The Department shall establish design and construction standards for bicycle and pedestrian ways. Beginning July 1, 2007, this Section shall apply to planning and training purposes only. Beginning July 1, 2008, this Section shall apply to construction projects.
(Source: P.A. 95-665, eff. 10-10-07.)