(5) Welding.
(6) Pharmacy Technician.
(7) General Carpentry.
(8) Interior Systems Carpentry.
(9) Drywall.
(10) Floor Covering.
(11) Mill-cabinetry.
(12) Millwright.
(13) Insulation/Spray Foam.
(14) Siding Installation.
(15) Roofing.
(16) Lathing.
(17) Pile Driving.
(18) Concrete Forming.
(19) Scaffolding.
(20) Residential Electrical Construction.
(21) Commercial Electrical Construction.
(22) Industrial Electrical Construction.
(23) Renewable Energy Technology.
(24) Energy Efficiency Concepts.
(25) Electrical Manufacturing Sector.
(26) Communications Systems.
(27) Life Safety Systems.
(28) Security Systems.
(29) Sound Alarms.
(30) Electrical Work Safety Practices.
(31) Electrical Maintenance.
(32) Fire Alarms.
(33) Motor Controls.
(34) Transformers.
(35) Variable Speed Drive Systems.
(36) Rigging.
The program must, at a minimum, be a 9-month program and use a credit-hour system.
(b) The public community college district may accept the credits as direct equivalent credits or prior learning credits, as determined by the district and consistent with the accrediting standards and institutional and residency requirements of the Board, the Higher Learning Commission, other State and national accreditors, and State licensing bodies, as appropriate.
(c) Any designation given by the Board of credit hour value for items (1) through (6) under subsection (a) shall be applied by the community college district as direct or elective credit toward an associate degree of applied science or its equivalent as determined by the community college district.
(Source: P.A. 100-569, eff. 12-15-17; 101-194, eff. 8-2-19.)
|