(30 ILCS 537/20) (Section scheduled to be repealed on January 1, 2026)
Sec. 20. Development of scope and performance criteria.
(a) The State construction agency shall develop, with the assistance of a
licensed design professional, a request
for proposal, which shall include scope and performance criteria.
The scope and performance criteria must be in sufficient detail and contain
adequate information to reasonably apprise the qualified design-build entities
of the State construction agency's overall programmatic needs and goals,
including criteria and preliminary design plans,
general budget parameters, schedule, and delivery requirements.
(b) Each request for proposal shall also include a description of the level
of design to be provided in the proposals. This description must include the
scope and type of renderings, drawings, and specifications that, at a minimum,
will be required by the State construction agency to be produced by the
design-build entities.
(c) The scope and performance criteria shall be prepared by a design
professional who is an employee of the State construction agency, or the State
construction
agency may
contract with an independent design professional selected under the
Architectural, Engineering and Land Surveying Qualification Based Selection Act
(30 ILCS 535/) to provide these services.
(d) The design professional that prepares the scope and performance criteria
is prohibited from participating in any design-build entity proposal for the
project.
(Source: P.A. 94-716, eff. 12-13-05.) |