Illinois General Assembly - Full Text of SB2233
Illinois General Assembly

Previous General Assemblies

Full Text of SB2233  98th General Assembly

SB2233enr 98TH GENERAL ASSEMBLY

  
  
  

 


 
SB2233 EnrolledLRB098 05502 OMW 35537 b

1    AN ACT concerning local government.
 
2    Be it enacted by the People of the State of Illinois,
3represented in the General Assembly:
 
4    Section 5. The Public Building Commission Act is amended by
5changing Sections 2.5, 3, 20, 20.3, 20.4, 20.5, 20.10, 20.15,
620.20, and 20.25 as follows:
 
7    (50 ILCS 20/2.5)
8    (Section scheduled to be repealed on June 1, 2013)
9    Sec. 2.5. Legislative policy; conditions for use of
10design-build. It is the intent of the General Assembly that a
11commission be allowed to use the design-build delivery method
12for public projects if it is shown to be in the commission's
13best interest for that particular project.
14    It shall be the policy of the commission in the procurement
15of design-build services to publicly announce all requirements
16for design-build services and to procure these services on the
17basis of demonstrated competence and qualifications and with
18due regard for the principles of competitive selection.
19    The commission shall, prior to issuing requests for
20proposals, promulgate and publish procedures for the
21solicitation and award of contracts pursuant to this Act.
22    The commission shall, for each public project or projects
23permitted under this Act, make a written determination,

 

 

SB2233 Enrolled- 2 -LRB098 05502 OMW 35537 b

1including a description as to the particular advantages of the
2design-build procurement method, that it is in the best
3interests of the commission to enter into a design-build
4contract for the project or projects.
5    In making that determination, the following factors shall
6be considered:
7        (1) The probability that the design-build procurement
8    method will be in the best interests of the commission by
9    providing a material savings of time or cost over the
10    design-bid-build or other delivery system.
11        (2) The type and size of the project and its
12    suitability to the design-build procurement method.
13        (3) The ability of the design-build entity to define
14    and provide comprehensive scope and performance criteria
15    for the project.
16    The commission shall require the design-build entity to
17comply with the utilization goals established by the corporate
18authorities of the commission for minority and women business
19enterprises and to comply with Section 2-105 of the Illinois
20Human Rights Act.
21    This Section is repealed on June 1, 2018; provided that any
22design-build contracts entered into before such date or any
23procurement of a project under this Act commenced before such
24date, and the contracts resulting from those procurements,
25shall remain effective 5 years after the effective date of this
26amendatory Act of the 95th General Assembly.

 

 

SB2233 Enrolled- 3 -LRB098 05502 OMW 35537 b

1(Source: P.A. 95-595, eff. 6-1-08.)
 
2    (50 ILCS 20/3)  (from Ch. 85, par. 1033)
3    Sec. 3. The following terms, wherever used, or referred to
4in this Act, mean unless the context clearly requires a
5different meaning:
6    (a) "Commission" means a Public Building Commission
7created pursuant to this Act.
8    (b) "Commissioner" or "Commissioners" means a Commissioner
9or Commissioners of a Public Building Commission.
10    (c) "County seat" means a city, village or town which is
11the county seat of a county.
12    (d) "Municipality" means any city, village or incorporated
13town of the State of Illinois.
14    (e) "Municipal corporation" includes a county, city,
15village, town, (including a county seat), park district, school
16district in a county of 3,000,000 or more population, board of
17education of a school district in a county of 3,000,000 or more
18population, sanitary district, airport authority contiguous
19with the County Seat as of July 1, 1969 and any other municipal
20body or governmental agency of the State, and until July 1,
212011, a school district that (i) was organized prior to 1860,
22(ii) is located in part in a city originally incorporated prior
23to 1840, and (iii) entered into a lease with a Commission prior
24to 1993, and its board of education, but does not include a
25school district in a county of less than 3,000,000 population,

 

 

SB2233 Enrolled- 4 -LRB098 05502 OMW 35537 b

1a board of education of a school district in a county of less
2than 3,000,000 population, or a community college district in a
3county of less than 3,000,000 population, except that until
4July 1, 2011, a school district that (i) was organized prior to
51860, (ii) is located in part in a city originally incorporated
6prior to 1840, and (iii) entered into a lease with a Commission
7prior to 1993, and its board of education, are included.
8    (f) "Governing body" includes a city council, county board,
9or any other body or board, by whatever name it may be known,
10charged with the governing of a municipal corporation.
11    (g) "Presiding officer" includes the mayor or president of
12a city, village or town, the presiding officer of a county
13board, or the presiding officer of any other board or
14commission, as the case may be.
15    (h) "Oath" means oath or affirmation.
16    (i) "Building" means an improvement to real estate to be
17made available for use by a municipal corporation for the
18furnishing of governmental services to its citizens, together
19with any land or interest in land necessary or useful in
20connection with the improvement.
21    (j) "Delivery system" means the design and construction
22approach used to develop and construct a project.
23    (k) "Design-bid-build" means the traditional delivery
24system used on public projects that incorporates the Local
25Government Professional Services Selection Act (50 ILCS 510/)
26and the principles of competitive selection.

 

 

SB2233 Enrolled- 5 -LRB098 05502 OMW 35537 b

1    (l) "Design-build" means a delivery system that provides
2responsibility within a single contract for the furnishing of
3architecture, engineering, land surveying and related services
4as required, and the labor, materials, equipment, and other
5construction services for the project.
6    (m) "Design-build contract" means a contract for a public
7project under this Act between the Commission and a
8design-build entity to furnish architecture, engineering, land
9surveying, and related services as required, and to furnish the
10labor, materials, equipment, and other construction services
11for the project. The design-build contract may be conditioned
12upon subsequent refinements in scope and price and may allow
13the Commission to make modifications in the project scope
14without invalidating the design-build contract.
15    (n) "Design-build entity" means any individual, sole
16proprietorship, firm, partnership, joint venture, corporation,
17professional corporation, or other entity that proposes to
18design and construct any public project under this Act. A
19design-build entity and associated design-build professionals
20shall conduct themselves in accordance with the laws of this
21State and the related provisions of the Illinois Administrative
22Code, as referenced by the licensed design professionals Acts
23of this State.
24    (o) "Design professional" means any individual, sole
25proprietorship, firm, partnership, joint venture, corporation,
26professional corporation, or other entity that offers services

 

 

SB2233 Enrolled- 6 -LRB098 05502 OMW 35537 b

1under the Illinois Architecture Practice Act of 1989 (225 ILCS
2305/), the Professional Engineering Practice Act of 1989 (225
3ILCS 325/), the Structural Engineering Licensing Act of 1989
4(225 ILCS 340/), or the Illinois Professional Land Surveyor Act
5of 1989 (225 ILCS 330/).
6    (p) "Evaluation criteria" means the requirements for the
7separate phases of the selection process for design-build
8proposals as defined in this Act and may include the
9specialized experience, technical qualifications and
10competence, capacity to perform, past performance, experience
11with similar projects, assignment of personnel to the project,
12and other appropriate factors. Price may not be used as a
13factor in the evaluation of Phase I proposals.
14    (q) "Proposal" means the offer to enter into a design-build
15contract as submitted by a design-build entity in accordance
16with this Act.
17    (r) "Request for proposal" means the document used by the
18Commission to solicit proposals for a design-build contract.
19    (s) "Scope and performance criteria" means the
20requirements for the public project, including but not limited
21to, the intended usage, capacity, size, scope, quality and
22performance standards, life-cycle costs, and other
23programmatic criteria that are expressed in
24performance-oriented and quantifiable specifications and
25drawings that can be reasonably inferred and are suited to
26allow a design-build entity to develop a proposal.

 

 

SB2233 Enrolled- 7 -LRB098 05502 OMW 35537 b

1    (t) "Guaranteed maximum price" means a form of contract in
2which compensation may vary according to the scope of work
3involved but in any case may not exceed an agreed total amount.
4    Definitions in this Section with respect to design-build
5shall have no effect beginning on June 1, 2018; provided that
6any design-build contracts entered into before such date or any
7procurement of a project under this Act commenced before such
8date, and the contracts resulting from those procurements,
9shall remain effective 5 years after the effective date of this
10amendatory Act of the 95th General Assembly.
11(Source: P.A. 94-1071, eff. 1-1-07; 95-595, eff. 6-1-08.)
 
12    (50 ILCS 20/20)  (from Ch. 85, par. 1050)
13    Sec. 20. Contracts let to lowest responsible bidder;
14competitive bidding; advertisement for bids; design-build
15contracts.
16    (a) All contracts to be let for the construction,
17alteration, improvement, repair, enlargement, demolition or
18removal of any buildings or other facilities, or for materials
19or supplies to be furnished, where the amount thereof is in
20excess of $20,000, shall be awarded as a design-build contract
21in accordance with Sections 20.3 through 20.20 or shall be let
22to the lowest responsible bidder, or bidders, on open
23competitive bidding.
24    (b) A contract awarded on the basis of competitive bidding
25shall be awarded after public advertisement published at least

 

 

SB2233 Enrolled- 8 -LRB098 05502 OMW 35537 b

1once in each week for three consecutive weeks prior to the
2opening of bids, in a daily newspaper of general circulation in
3the county where the commission is located, except in the case
4of an emergency situation, as determined by the chief executive
5officer. If a contract is awarded in an emergency situation,
6(i) the contract accepted must be based on the lowest
7responsible proposal after the commission has made a diligent
8effort to solicit multiple proposals by telephone, facsimile,
9or other efficient means and (ii) the chief executive officer
10must submit a report at the next regular meeting of the Board,
11to be ratified by the Board and entered into the official
12record, that states the chief executive officer's reason for
13declaring an emergency situation, the names of all parties
14solicited for proposals, and their proposals and that includes
15a copy of the contract awarded. Nothing contained in this
16Section shall be construed to prohibit the Board of
17Commissioners from placing additional advertisements in
18recognized trade journals. Advertisements for bids shall
19describe the character of the proposed contract in sufficient
20detail to enable the bidders thereon to know what their
21obligation will be, either in the advertisement itself, or by
22reference to detailed plans and specifications on file in the
23office of the Public Building Commission at the time of the
24publication of the first announcement. Such advertisement
25shall also state the date, time, and place assigned for the
26opening of bids. No bids shall be received at any time

 

 

SB2233 Enrolled- 9 -LRB098 05502 OMW 35537 b

1subsequent to the time indicated in said advertisement.
2    (c) In addition to the requirements of Section 20.3, the
3Commission shall advertise a design-build solicitation at
4least once in a daily newspaper of general circulation in the
5county where the Commission is located. The date that Phase I
6submissions by design-build entities are due must be at least
714 calendar days after the date the newspaper advertisement for
8design-build proposals is first published. The advertisement
9shall identify the design-build project, the due date, the
10place and time for Phase I submissions, and the place where
11proposers can obtain a complete copy of the request for
12design-build proposals, including the criteria for evaluation
13and the scope and performance criteria. The Commission is not
14precluded from using other media or from placing advertisements
15in addition to the one required under this subsection.
16    (d) The Board of Commissioners may reject any and all bids
17and proposals received and may readvertise for bids or issue a
18new request for design-build proposals.
19    (e) All bids shall be open to public inspection in the
20office of the Public Building Commission after an award or
21final selection has been made. The successful bidder for such
22work shall enter into contracts furnished and prescribed by the
23Board of Commissioners and in addition to any other bonds
24required under this Act the successful bidder shall execute and
25give bond, payable to and to be approved by the Commission,
26with a corporate surety authorized to do business under the

 

 

SB2233 Enrolled- 10 -LRB098 05502 OMW 35537 b

1laws of the State of Illinois, in an amount to be determined by
2the Board of Commissioners, conditioned upon the payment of all
3labor furnished and materials supplied in the prosecution of
4the contracted work. If the bidder whose bid has been accepted
5shall neglect or refuse to accept the contract within five (5)
6days after written notice that the same has been awarded to
7him, or if he accepts but does not execute the contract and
8give the proper security, the Commission may accept the next
9lowest bidder, or readvertise and relet in manner above
10provided.
11    (f) In case any work shall be abandoned by any contractor
12or design-build entity, the Commission may, if the best
13interests of the Commission be thereby served, adopt on behalf
14of the Commission all subcontracts made by such contractor or
15design-build entity for such work and all such sub-contractors
16shall be bound by such adoption if made; and the Commission
17shall, in the manner provided in this Act, readvertise and
18relet, or request proposals and award design-build contracts
19for, the work specified in the original contract exclusive of
20so much thereof as shall be accepted. Every contract when made
21and entered into, as provided in this Section or Section 20.20,
22shall be executed, held by the Commission, and filed in its
23records, and one copy of which shall be given to the contractor
24or design-build entity.
25    (g) The provisions of this Section with respect to
26design-build shall have no effect beginning on June 1, 2018;

 

 

SB2233 Enrolled- 11 -LRB098 05502 OMW 35537 b

1provided that any design-build contracts entered into before
2such date or any procurement of a project under this Act
3commenced before such date, and the contracts resulting from
4those procurements, shall remain effective 5 years after June
51, 2008 (the effective date of Public Act 95-595).
6(Source: P.A. 95-595, eff. 6-1-08; 95-614, eff. 9-11-07;
795-876, eff. 8-21-08.)
 
8    (50 ILCS 20/20.3)
9    (Section scheduled to be repealed on June 1, 2013)
10    Sec. 20.3. Solicitation of design-build proposals.
11    (a) When the Commission elects to use the design-build
12delivery method, it must issue a notice of intent to receive
13proposals for the project at least 14 days before issuing the
14request for the proposal. The Commission must publish the
15advance notice in a daily newspaper of general circulation in
16the county where the Commission is located. The Commission is
17encouraged to use publication of the notice in related
18construction industry service publications. A brief
19description of the proposed procurement must be included in the
20notice. The Commission must provide a copy of the request for
21proposal to any party requesting a copy.
22    (b) The request for proposal shall be prepared for each
23project and must contain, without limitation, the following
24information:
25        (1) The name of the Commission.

 

 

SB2233 Enrolled- 12 -LRB098 05502 OMW 35537 b

1        (2) A preliminary schedule for the completion of the
2    contract.
3        (3) The proposed budget for the project, the source of
4    funds, and the currently available funds at the time the
5    request for proposal is submitted.
6        (4) Prequalification criteria for design-build
7    entities wishing to submit proposals. The Commission shall
8    include, at a minimum, its normal prequalification,
9    licensing, registration, and other requirements, but
10    nothing contained herein precludes the use of additional
11    prequalification criteria by the Commission.
12        (5) Material requirements of the contract, including
13    but not limited to, the proposed terms and conditions,
14    required performance and payment bonds, insurance, and the
15    entity's plan to comply with the utilization goals
16    established by the corporate authorities of the Commission
17    for minority and women business enterprises and to comply
18    with Section 2-105 of the Illinois Human Rights Act.
19        (6) The performance criteria.
20        (7) The evaluation criteria for each phase of the
21    solicitation.
22        (8) The number of entities that will be considered for
23    the technical and cost evaluation phase.
24    (c) The Commission may include any other relevant
25information that it chooses to supply. The design-build entity
26shall be entitled to rely upon the accuracy of this

 

 

SB2233 Enrolled- 13 -LRB098 05502 OMW 35537 b

1documentation in the development of its proposal.
2    (d) The date that proposals are due must be at least 21
3calendar days after the date of the issuance of the request for
4proposal. In the event the cost of the project is estimated to
5exceed $12,000,000, then the proposal due date must be at least
628 calendar days after the date of the issuance of the request
7for proposal. The Commission shall include in the request for
8proposal a minimum of 30 days to develop the Phase II
9submissions after the selection of entities from the Phase I
10evaluation is completed.
11    (e) This Section is repealed on June 1, 2018; provided that
12any design-build contracts entered into before such date or any
13procurement of a project under this Act commenced before such
14date, and the contracts resulting from those procurements,
15shall remain effective 5 years after the effective date of this
16amendatory Act of the 95th General Assembly.
17(Source: P.A. 95-595, eff. 6-1-08.)
 
18    (50 ILCS 20/20.4)
19    (Section scheduled to be repealed on June 1, 2013)
20    Sec. 20.4. Development of design-build scope and
21performance criteria.
22    (a) The Commission shall develop, with the assistance of a
23licensed design professional, a request for proposal, which
24shall include scope and performance criteria. The scope and
25performance criteria must be in sufficient detail and contain

 

 

SB2233 Enrolled- 14 -LRB098 05502 OMW 35537 b

1adequate information to reasonably apprise the qualified
2design-build entities of the Commission's overall programmatic
3needs and goals, including criteria and preliminary design
4plans, general budget parameters, schedule, and delivery
5requirements.
6    (b) Each request for proposal shall also include a
7description of the level of design to be provided in the
8proposals. This description must include the scope and type of
9renderings, drawings, and specifications that, at a minimum,
10will be required by the Commission to be produced by the
11design-build entities.
12    (c) The scope and performance criteria shall be prepared by
13a design professional who is an employee of the Commission, or
14the Commission may contract with an independent design
15professional selected under the Local Government Professional
16Services Selection Act (50 ILCS 510/) to provide these
17services.
18    (d) The design professional that prepares the scope and
19performance criteria is prohibited from participating in any
20design-build entity proposal for the project.
21    (e) This Section is repealed on June 1, 2018; provided that
22any design-build contracts entered into before such date or any
23procurement of a project under this Act commenced before such
24date, and the contracts resulting from those procurements,
25shall remain effective 5 years after the effective date of this
26amendatory Act of the 95th General Assembly.

 

 

SB2233 Enrolled- 15 -LRB098 05502 OMW 35537 b

1(Source: P.A. 95-595, eff. 6-1-08.)
 
2    (50 ILCS 20/20.5)
3    (Section scheduled to be repealed on June 1, 2013)
4    Sec. 20.5. Procedures for design-build selection.
5    (a) The Commission must use a two-phase procedure for the
6selection of the successful design-build entity. Phase I of the
7procedure will evaluate and shortlist the design-build
8entities based on qualifications, and Phase II will evaluate
9the technical and cost proposals.
10    (b) The Commission shall include in the request for
11proposal the evaluating factors to be used in Phase I. These
12factors are in addition to any prequalification requirements of
13design-build entities that the Commission has set forth. Each
14request for proposal shall establish the relative importance
15assigned to each evaluation factor and subfactor, including any
16weighting of criteria to be employed by the Commission. The
17Commission must maintain a record of the evaluation scoring to
18be disclosed in event of a protest regarding the solicitation.
19    The Commission shall include the following criteria in
20every Phase I evaluation of design-build entities: (1)
21experience of personnel; (2) successful experience with
22similar project types; (3) financial capability; (4)
23timeliness of past performance; (5) experience with similarly
24sized projects; (6) successful reference checks of the firm;
25(7) commitment to assign personnel for the duration of the

 

 

SB2233 Enrolled- 16 -LRB098 05502 OMW 35537 b

1project and qualifications of the entity's consultants; and (8)
2ability or past performance in meeting or exhausting good faith
3efforts to meet the utilization goals for minority and women
4business enterprises established by the corporate authorities
5of the Commission and in complying with Section 2-105 of the
6Illinois Human Rights Act. The Commission may include any
7additional relevant criteria in Phase I that it deems necessary
8for a proper qualification review. The Commission may include
9any additional relevant criteria in Phase I that it deems
10necessary for a proper qualification review.
11    The Commission may not consider any design-build entity for
12evaluation or award if the entity has any pecuniary interest in
13the project or has other relationships or circumstances,
14including but not limited to, long-term leasehold, mutual
15performance, or development contracts with the Commission,
16that may give the design-build entity a financial or tangible
17advantage over other design-build entities in the preparation,
18evaluation, or performance of the design-build contract or that
19create the appearance of impropriety. No design-build proposal
20shall be considered that does not include an entity's plan to
21comply with the requirements established in the minority and
22women business enterprises and economically disadvantaged
23firms established by the corporate authorities of the
24Commission and with Section 2-105 of the Illinois Human Rights
25Act.
26    Upon completion of the qualifications evaluation, the

 

 

SB2233 Enrolled- 17 -LRB098 05502 OMW 35537 b

1Commission shall create a shortlist of the most highly
2qualified design-build entities. The Commission, in its
3discretion, is not required to shortlist the maximum number of
4entities as identified for Phase II evaluation, provided
5however, no less than 2 design-build entities nor more than 6
6are selected to submit Phase II proposals.
7    The Commission shall notify the entities selected for the
8shortlist in writing. This notification shall commence the
9period for the preparation of the Phase II technical and cost
10evaluations. The Commission must allow sufficient time for the
11shortlist entities to prepare their Phase II submittals
12considering the scope and detail requested by the Commission.
13    (c) The Commission shall include in the request for
14proposal the evaluating factors to be used in the technical and
15cost submission components of Phase II. Each request for
16proposal shall establish, for both the technical and cost
17submission components of Phase II, the relative importance
18assigned to each evaluation factor and subfactor, including any
19weighting of criteria to be employed by the Commission. The
20Commission must maintain a record of the evaluation scoring to
21be disclosed in event of a protest regarding the solicitation.
22    The Commission shall include the following criteria in
23every Phase II technical evaluation of design-build entities:
24(1) compliance with objectives of the project; (2) compliance
25of proposed services to the request for proposal requirements;
26(3) quality of products or materials proposed; (4) quality of

 

 

SB2233 Enrolled- 18 -LRB098 05502 OMW 35537 b

1design parameters; (5) design concepts; (6) innovation in
2meeting the scope and performance criteria; and (7)
3constructability of the proposed project. The Commission may
4include any additional relevant technical evaluation factors
5it deems necessary for proper selection.
6    The Commission shall include the following criteria in
7every Phase II cost evaluation: the guaranteed maximum project
8cost and the time of completion. The Commission may include any
9additional relevant technical evaluation factors it deems
10necessary for proper selection. The guaranteed maximum project
11cost criteria weighing factor shall not exceed 30%.
12    The Commission shall directly employ or retain a licensed
13design professional to evaluate the technical and cost
14submissions to determine if the technical submissions are in
15accordance with generally accepted industry standards.
16    Upon completion of the technical submissions and cost
17submissions evaluation, the Commission may award the
18design-build contract to the highest overall ranked entity.
19    (d) This Section is repealed on June 1, 2018; provided that
20any design-build contracts entered into before such date or any
21procurement of a project under this Act commenced before such
22date, and the contracts resulting from those procurements,
23shall remain effective 5 years after the effective date of this
24amendatory Act of the 95th General Assembly.
25(Source: P.A. 95-595, eff. 6-1-08.)
 

 

 

SB2233 Enrolled- 19 -LRB098 05502 OMW 35537 b

1    (50 ILCS 20/20.10)
2    (Section scheduled to be repealed on June 1, 2013)
3    Sec. 20.10. Small design-build projects. In any case where
4the total overall cost of the project is estimated to be less
5than $12,000,000, the Commission may combine the two-phase
6procedure for design-build selection described in Section 20.5
7into one combined step, provided that all the requirements of
8evaluation are performed in accordance with Section 20.5.
9    This Section is repealed on June 1, 2018; provided that any
10design-build contracts entered into before such date or any
11procurement of a project under this Act commenced before such
12date, and the contracts resulting from those procurements,
13shall remain effective 5 years after the effective date of this
14amendatory Act of the 95th General Assembly.
15(Source: P.A. 95-595, eff. 6-1-08.)
 
16    (50 ILCS 20/20.15)
17    (Section scheduled to be repealed on June 1, 2013)
18    Sec. 20.15. Submission of design-build proposals.
19Design-build proposals must be properly identified and sealed.
20Proposals may not be reviewed until after the deadline for
21submission has passed as set forth in the request for
22proposals. All design-build entities submitting proposals
23shall be disclosed after the deadline for submission, and all
24design-build entities who are selected for Phase II evaluation
25shall also be disclosed at the time of that determination.

 

 

SB2233 Enrolled- 20 -LRB098 05502 OMW 35537 b

1    Phase II design-build proposals shall include a bid bond in
2the form and security as designated in the request for
3proposals. Proposals shall also contain a separate sealed
4envelope with the cost information within the overall proposal
5submission. Proposals shall include a list of all design
6professionals and other entities to which any work identified
7in Section 30-30 of the Illinois Procurement Code as a
8subdivision of construction work may be subcontracted during
9the performance of the contract.
10    Proposals must meet all material requirements of the
11request for proposal or they may be rejected as non-responsive.
12The Commission shall have the right to reject any and all
13proposals.
14    The drawings and specifications of any unsuccessful
15design-build proposal shall remain the property of the
16design-build entity.
17    The Commission shall review the proposals for compliance
18with the performance criteria and evaluation factors.
19    Proposals may be withdrawn prior to the due date and time
20for submissions for any cause. After evaluation begins by the
21Commission, clear and convincing evidence of error is required
22for withdrawal.
23    This Section is repealed on June 1, 2018; provided that any
24design-build contracts entered into before such date or any
25procurement of a project under this Act commenced before such
26date, and the contracts resulting from those procurements,

 

 

SB2233 Enrolled- 21 -LRB098 05502 OMW 35537 b

1shall remain effective 5 years after the effective date of this
2amendatory Act of the 95th General Assembly.
3(Source: P.A. 95-595, eff. 6-1-08.)
 
4    (50 ILCS 20/20.20)
5    (Section scheduled to be repealed on June 1, 2013)
6    Sec. 20.20. Design-build award. The Commission may award a
7design-build contract to the highest overall ranked entity.
8Notice of award shall be made in writing. Unsuccessful entities
9shall also be notified in writing. The Commission may not
10request a best and final offer after the receipt of proposals.
11The Commission may negotiate with the selected design-build
12entity after award but prior to contract execution for the
13purpose of securing better terms than originally proposed,
14provided that the salient features of the request for proposal
15are not diminished.
16    This Section is repealed on June 1, 2018; provided that any
17design-build contracts entered into before such date or any
18procurement of a project under this Act commenced before such
19date, and the contracts resulting from those procurements,
20shall remain effective 5 years after the effective date of this
21amendatory Act of the 95th General Assembly.
22(Source: P.A. 95-595, eff. 6-1-08.)
 
23    (50 ILCS 20/20.25)
24    (Section scheduled to be repealed on June 1, 2013)

 

 

SB2233 Enrolled- 22 -LRB098 05502 OMW 35537 b

1    Sec. 20.25. Minority and female owned enterprises; total
2construction budget.
3    (a) Each year, within 60 days following the end of a
4commission's fiscal year, the commission shall provide a report
5to the General Assembly addressing the utilization of minority
6and female owned business enterprises on design-build
7projects.
8    (b) The payments for design-build projects by any
9commission in one fiscal year shall not exceed 50% 25% of the
10moneys spent on construction projects during the same fiscal
11year.
12    (c) This Section is repealed on June 1, 2018; provided that
13any design-build contracts entered into before such date or any
14procurement of a project under this Act commenced before such
15date, and the contracts resulting from those procurements,
16shall remain effective 5 years after the effective date of this
17amendatory Act of the 95th General Assembly.
18(Source: P.A. 95-595, eff. 6-1-08.)
 
19    Section 99. Effective date. This Act takes effect upon
20becoming law.