TITLE 62: MINING
CHAPTER I: DEPARTMENT OF NATURAL RESOURCES
PART 300 SURFACE MINED LAND CONSERVATION AND RECLAMATION ACT
SECTION 300.235 TRAINING


 

Section 300.235  Training

 

a)         Training required herein, for those persons not previously trained in the subjects required herein, shall be conducted by either the Department, the operator or the operator's training representative.   The operator's training representative may include but is not limited to junior colleges, consultants and explosives manufacturers. The training must meet the requirements of this Section.

 

b)         The training for blaster's licensure shall include instruction in:

 

1)         The design and layout of blasts, including geology, topography and the proper use of delays.

 

2)         Control of ground vibration.

 

3)         Control of flyrock and airblast.

 

4)         Design and loading of boreholes.

 

5)         Priming and boosting.

 

6)         Tamping and stemming, including methods and materials.

 

7)         Blast initiation systems.

 

8)         The use of blasting machines.

 

9)         The use of circuit testing equipment.

 

10)       The general properties of explosives, including blasting agents and selection criteria.

 

11)       Ground vibration, airblast and monitoring.

 

12)       The use of ground vibration and airblast records as blast design factors.

 

13)       The need for accurate reports and blasting logs and their proper preparation.

 

14)       Current Illinois and Federal  laws and  regulations pertaining to blasting at the operation.

 

15)       Planning for unpredictable blasting hazards to the public and mine personnel. Illustrative examples are adverse weather, stray electrical currents, flyrock, radio frequency energy and misfires.

 

16)       Signs, warning signals and control of the potential flyrock area.

 

17)       Site security and safety.

 

18)       Handling, transportation and storage of explosives.

 

19)       New technology as it develops and is implemented in the field.

 

20)       Training and licensure requirements.

 

c)         The licensed blaster shall provide direction and on-the-job training to all non-licensed blasting personnel under his supervision.

 

(Source:  Amended at 23 Ill. Reg. 11231, effective August 26, 1999)